Loading. Please Wait
Lehmann Traveller On the go around the clock and at home wherever the pulse of life can be felt – this is you. With the pristine sound of your music in your ears the world is at your feet, and you breathe in life to the fullest. For this purpose, our Traveller is just the right choice: despite its compact size, it will always elate you with excellent sound quality on all your short and long voyages. Moreover, it does not only sound phenomenal, but even cuts a fine figure.
The Traveller sets a new standard in the realm of mobile headphone amplifiers. Lehmannaudio have designed it for a generation who is constantly on the move: no matter if at home, in the office or travelling internationally – this elegant companion will always give you a unique sound experience, while continuing to live up to the highest aesthetic demands.
Besides its practical size and ease of use, the Traveller's stand-out ability is in its outstanding sound quality. This is the result of Lehmann audio’s decades of experience in the audio sector and their infinite passion for music. First-class components and a sophisticated circuit design are self-evident as soon as you switch Traveller on.
The Traveller’s intuitive design requires only two push buttons. The volume control works electronically and is therefore utterly precise, even down to the lowest levels. This is due to a microprocessor-controlled passive resistor network which prevents sonic losses. The set volume levels is saved automatically when turning the unit off, and with a maximum battery run-time of more than 20 hours the music won’t stop playing even on the longest flights. By working in the analogue domain, Traveller is also guaranteed to work with all modern portable players.
The exceptionally transparent sound is provided by the discrete zero global feedback output stage. Headphones and players find contact via solid mini jack sockets from Lumberg. The voltage gain is affected by audiophile components from Analog Devices and Burr Brown.
This fully analogue headphone amplifier will drive even demanding headphones hands down and is so impressive that it could also double quite easily as a pre-amp for active loudspeakers. This is made possible by two pairs of parallel inputs and outputs plus another input and output socket on the front and rear panel.
This device is also ideally suited for persons with hearing impairments: when needed, the so-called "Centre Adjust" function of the Traveller optimises the imaging of the "acoustical centre". That way every music lover can level out unevenly recorded source signals or listening differences between the right and left ear.
An audiophile mini jack cable from Audictive and a charging cable are included in the box, the charging socket complies with the Micro USB standard.
3.5MM JACK INPUT(S) 1
HEADPHONE OUTPUT 3.5mm Mini Jack
HEADPHONE AMP OUTPUT POWER 12mW @ 330 ohms
HEADPHONE AMP SIGNAL-TO-NOISE RATIO (@ 0dB Gain) > 95 dB
HEADPHONE OUTPUT IMPEDANCE 3 Ω
HEADPHONE AMP THD (3mW / 330 ohms) < 0.02 %
HEADPHONE AMP FREQUENCY RESPONSE 20Hz - 30kHz (-0.5dB)
HEADPHONE AMP CHANNEL SEPARATION > 80dB @ 10kHz
HEADPHONE AMP GAIN max. 10 dB
MAXIMUM POWER CONSUMPTION LiPo 3.7 V, 4,000 mAh W
BATTERY > 20 Hours on a single charge (depending on volume)
DIMENSIONS (W X H X D) 80 x 25 x 90 mm
WEIGHT 0.196 kg