Loading. Please Wait
Project Debut Carbon DC Turntable including Ortofon 2M Red cartridge & Perspex Dust Cover.
The original Pro-Ject Debut was released in the late 1990’s during a time when CD was king, and the vinyl format was presumed to be all but gone. But well over a decade later the model still stands, and it deserves a key accreditation in the ongoing success of a rejuvenated vinyl and budget turntable market. The Debut symbolises all that is good about the vinyl market; it is easy to set-up and fantastic to listen to, with the right mixture of user-friendliness and opportunity to tweak and upgrade.
At the beginning of 2012, the new Debut Carbon expands on the Debut III in a variety of ways; namely the inclusion of an 8.6" carbon fibre tonearm, 12" platter and rear-mounted junction box. The new motor isolation system also utilises a wholly unique rubber compound developed exclusively by Ortofon A/S to offer dramatically reduced resonance transference from motor.
Now 2 years on the Debut Carbon DC benefits from an upgraded new DC power supply with ultra precision frequency DC-driven AC generator (matching the one used in the Pro-Ject Speed Box) for precision speed stability. The new DC model also prospers from the upgrade by using less power in operation and when not in use.
The new 9V AC motor upgrade also comes with an improved TPE motor suspension. This new suspension reduces vibration caused by the motor and is normally found on improved turntables such as the Pro-Ject Xpression Carbon UKX.
The Debut Carbon DC also sees the re-introduction of the Debut's famous colours! Not only is the Debut Carbon DC available in the gloss black finish as standard, but for the same cost you can also choose to have a statement-making Red, Blue, Green, Yellow, White, Purple or Light Grey gloss finish.
New DC power supply with ultra precision frequency DC-driven AC generator (like the Speed Box) for ultimate speed stability
New TPE motor suspension
8.6" one-piece carbon fibre tonearm, adding stiffness and reducing resonance around the pick-up cartridge (rarely found on budget turntables, due to high production costs).
High-quality counterweight - helping further reduce unwanted resonance.
Two isolation 'feet' made especially by Ortofon A/S, used to decouple the motor from the plinth.
Junction box installed, allowing for the easy upgrade of turntable interconnects.
Factory-fitted Ortofon 2m Red.
Speed: 33,45 RPM (Manual Speed Change)
Drive Principle: Belt Drive
Platter: 300mm Metal With Felt Mat
Main Bearing: Stainless Steel
Wow & Flutter: +/- 0.10%
Speed Drift: +/- 0.80%
Signal to Noise: - 68dB
Pre-Fitted Cartridge: Ortofon 2M Red
Tonearm: 8.6" Carbon Fibre
Effective Arm Length: 218.5mm
Effective Arm Mass: 6.0g
Tracking Force: 10-30mN
Included Accessories: RCA Cable, Lid
Dimensions (WxHxD): 415 x 118 x 320mm - Lid Closed
Weight: 5.6kg net