Loading. Please Wait

Shop Vickers HiFi
0% Finance Available

Project Xtension 10 Turntable inc. Perspex Dust Cover

Swipe To Cycle Images

The Project Xtension 10 Turntable is available as a special deal with or without the Ortofon Cadenza Red Cartridge (worth £875), see options above. Call for other cartridge options. This turntable is also available with up to 2 years Interest Free Credit from Vickers HiFi.

The Xtension 10 incorporates all of Pro-Ject's 20 years experience in turntable design.

The chassis is made from MDF filled with metal sand, which gives a high mass and is non-resonant. But in addition the turntable also uses magnetic feet, which decouple the main plinth from its base. The result of this combination is a merging of the influential 'mass loaded' and 'floating turntable' design principles. 

Instead of the old-standard adoption of pure metal for a main platter, Pro-Ject researched and uncovered a perfect alloy material, which has then be damped on the inner side with Sorbothane®. Taking this base structure, they've then glued recycled Vinyl records to the top (which act as a perfect mat) and baked this 'sandwich' before precision balancing it. The Xtension 10 subsequently benefits from a wonderfully resonance-free, heavy platter, that runs ultra-silently on an inverted ceramic ball-bearing, with magnetic suspension. 

The base of the included Pro-Ject 10cc Evolution Tonearm also benefits from 'high-mass' technologies, and is isolated from the main board by a sheet of Sorbothane®. To use this tonearm with a wide range of top quality phono cartridges, from 4 to 14g, it comes with a set of 4 different Sorbothane®- damped counterweights.

Finally, the Xtension 10 is also supplied with a beautiful dustcover with adjustable hinges, and is available in three high-gloss lacquer finishes.

Key Features:

  • Super-heavy 22 kg belt drive turntable
  • Mass-loaded magnetic-floating subchassis
  • Precision balanced sandwich-platter
  • Inverted ceramic ball bearing with magnetic support
  • Heavy weight record clamp
  • Extremely low level of natural resonance
  • Perfect decoupling through magnetic feet
  • Electronic speed control 33 / 45 / 78 rpm
  • Tonearm 10cc Evolution made from carbon fibre
  • Inverted tonearm bearings (ABEC 7 quality)

Technical Data:

Speeds:33 / 45 / 78 RPM    (Speed Box DS Built-In)
Acrylic Dust Cover:Yes
Tonearm Cable Included:Pro-Ject Connect-It 5P-C
Aluminium Feet:Magnetically Supported    Sorbothane Damped
T/T Main Bearing Damping:Heavy-Weight Metal Block
Maximum Speed Variance:± 0.08%
Maximum Wow & Flutter:± 0.01%
Platter Weight / Diameter:5.7kg / 300mm
Effective Arm Length / Overhang:254mm / 16mm
Effective Tonearm Mass:8.5g
Tracking Force Range:10 - 30mN
Cartridge Weight Range:4 - 14g      (4 Different Counterweights)
External Power Supply:220 - 240V / 50Hz Supply
            16V / 1.000mA AC Output
Dimensions (W x H x D):480 x 235 x 400        480 x 495 x 535 (Lid Open)
0% Finance Available

Free UK Delivery

Secure Payment


Showing 1 of 24